VF-3

The Haas VF-3 vertical machining center has 40" x 20" x 25" (1,016 x 508 x 635 mm) xyz travels and is built utilizing all American-made cast-iron components. Like every Haas machine, the VF-3 represents years of ongoing refinement. Customer feedback coupled with the relentless pursuit of perfection sees advancements and design-enhancing changes incorporated directly into the production line every day.

The Haas VF-3 is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately-sized machine. The VF-3 has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-3 produces either 75 ft-lb of torque at a low 1,200 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox -- and will also run up to 7,500 rpm in 1.2 seconds for finishing aluminum. With a long list of standard features and high-productivity options (many sold in discounted packages), the Haas VF-3 is one of the best values available today.

VF-3/APC

Increase productivity and run your Haas unattended by ordering your VF-3 equipped with the Haas heavy-duty Automatic Pallet Changer (APC). The Haas APC is a side-loading pallet changer featuring two 19" x 40" (483 x 1,016 mm) steel pallets (additional pallets are available). The heavy cast-iron base of the APC is secured directly to the VMC for stability, eliminating the need for further anchoring.

The APC allows non-machining tasks, such as fixture setups and part changeovers, to be performed off-line on one pallet while parts are being machined on the other pallet. With both pallets loaded, the VMC may be run unattended. This integrated system requires minimal training and runs seamlessly from the VMC’s control.

The Haas VF-3 vertical machining center itself has 40" x 20" x 25" (1,016 x 508 x 635 mm) xyz travels and is built utilizing all American-made cast-iron components. The APC footprint adds only 60" to the right side of the typical 118" width of the VF-3, and does so without blocking or entering the main aisle in front of the machine.

Like every Haas machine, the VF-3APC represents years of ongoing refinement. Customer feedback coupled with the relentless pursuit of perfection sees advancements and design-enhancing changes incorporated directly into the production line every day.

The Haas VF-3APC is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately-sized machine. The VF-3APC has a 40-taper cartridge spindle driven by a 20 hp vector Dual-Drive (Y-Delta) motor. The VF-3APC produces either 75 ft-lb of torque at a low 1,200 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox -- and will also run up to 7,500 rpm in 1.2 seconds for finishing aluminum. With a long list of standard features and high-productivity options (many sold in discounted packages), the Haas VF-3APC is one of the best values available today.