MACHINING CENTERS VERTICAL
MACHINING CENTERS VERTICAL
HAAS VERTICAL MACHINING CENTER, MODEL VF-0E
(1999) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY, FACTORY RECONDITIONED #17320.
HAAS VERTICAL MACHINING CENTER, MODEL VF-0
(1993) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 26”, X AXIS TRAVEL-20”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-10 HP, A.T.C.-16 POSITION.
EQUIPPED WITH: RIGID TAPPING, 4TH AXIS WIRED.
HAAS VERTICAL MACHINING CENTER, MODEL VF-0
(1996) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 26”, X AXIS TRAVEL-20”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-10 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-0
(1999) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 26”, X AXIS TRAVEL-20”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-10 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, THROUGH SPINDLE COOLANT.
HAAS VERTICAL MACHINING CENTER, MODEL VF-1
(1995) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 26”, X AXIS TRAVEL-20”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-10 HP, A.T.C.-20 POSITION, GEARED HEAD.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-1
(1996) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-15 HP, A.T.C.-20 POSITION, GEARED HEAD.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-1
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-15 HP, A.T.C.-20 POSITION, GEARED HEAD.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-2
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-10,000, HORSEPOWER-20 HP, A.T.C.-20 POSITION, VECTOR DRIVE.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, 10,000 R.P.M. SPINDLE, THRU SPINDLE COOLANT, FACTORY RECONDITIONED #9526.
HAAS VERTICAL MACHINING CENTER, MODEL VF-2
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION, VECTOR DRIVE.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY.
HAAS VERTICAL MACHINING CENTER, MODEL VF-2
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION, VECTOR DRIVE.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, 633 SPINDLE HOURS, FACTORY RECONDITIONED #10429.
HAAS VERTICAL MACHINING CENTER, MODEL VF-2
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-14” X 36”, X AXIS TRAVEL-30”, Y AXIS TRAVEL-16”, Z AXIS TRAVEL-20”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION, VECTOR DRIVE.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-3
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 48”, X AXIS TRAVEL-40”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY.
HAAS VERTICAL MACHINING CENTER, MODEL VF-3
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 48”, X AXIS TRAVEL-40”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION, VECTOR DRIVE.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY.
HAAS VERTICAL MACHINING CENTER, MODEL VF-3
(1999) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 48”, X AXIS TRAVEL-40”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION, VECTOR DRIVE.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY, THRU SPINDLE COOLANT.
HAAS VERTICAL MACHINING CENTER, MODEL VF-4/APC
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 52”, X AXIS TRAVEL-50”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-10,000, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, AUTOMATIC PALLET CHANGER, 10,000 R.P.M. SPINDLE, ROTARY TABLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-4
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 52”, X AXIS TRAVEL-50”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY, FACTORY RECONDITIONED #10063.
HAAS VERTICAL MACHINING CENTER, MODEL VF-4
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 52”, X AXIS TRAVEL-50”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, FACTORY RECONDITIONED #10232.
HAAS VERTICAL MACHINING CENTER, MODEL VF-4
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 52”, X AXIS TRAVEL-50”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY, FACTORY RECONDITIONED #15282.
HAAS VERTICAL MACHINING CENTER, MODEL VF-4
(1999) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-18” X 52”, X AXIS TRAVEL-50”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-25”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY, FACTORY RECONDITIONED #18096.
HAAS VERTICAL MACHINING CENTER, MODEL VF-6
(1996) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-28” X 64”, X AXIS TRAVEL-64”, Y AXIS TRAVEL-32”, Z AXIS TRAVEL-30”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-15 HP, A.T.C.-20 POSITION, GEARED HEAD (2-SPEED).
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE.
HAAS VERTICAL MACHINING CENTER, MODEL VF-6/50
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-28” X 64”, X AXIS TRAVEL-64”, Y AXIS TRAVEL-32”, Z AXIS TRAVEL-30”, SPINDLE TAPER-#50, SPINDLE RPM-5,000, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, 50 TAPER.
HAAS VERTICAL MACHINING CENTER, MODEL VF-6/50
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-28” X 64”, X AXIS TRAVEL-64”, Y AXIS TRAVEL-32”, Z AXIS TRAVEL-30”, SPINDLE TAPER-#50, SPINDLE RPM-5,000, HORSEPOWER-20 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY, 50 TAPER, FACTORY RECONDITIONED #10824.
HAAS VERTICAL MACHINING CENTER, MODEL VF-10/50
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
TABLE-28” X 120”, X AXIS TRAVEL-120”, Y AXIS TRAVEL-32”, Z AXIS TRAVEL-30”, SPINDLE TAPER-#50, SPINDLE RPM-5,000, HORSEPOWER-30 HP, A.T.C.-20 POSITION.
EQUIPPED WITH: CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 4 MEGABYTE OF EXTENDED MEMORY, 50 TAPER, REMOTE JOG HANDLE, THRU SPINDLE COOLANT, 861 SPINDLE HOURS.
MACHINING CENTERS HORIZONTAL
HAAS HORIZONTAL MACHINING CENTER, MODEL HS-1R
(1995) HAAS CNC CONTROL
SPECIFICATIONS:
X AXIS TRAVEL-24”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-22”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-15 HP, A.T.C.-24 POSITION.
EQUIPPED WITH: FULL 4TH AXIS, RIGID TAPPING, "LOW PRICE".
HAAS HORIZONTAL MACHINING CENTER, MODEL HS-1RP
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
X AXIS TRAVEL-24”, Y AXIS TRAVEL-20”, Z AXIS TRAVEL-22”, SPINDLE TAPER-#40, SPINDLE RPM-7,500, HORSEPOWER-22 HP, A.T.C.-24 POSITION.
EQUIPPED WITH: FULL 4TH AXIS, TWIN PALLET, 10,000 R.P.M. SPINDLE, THRU SPINDLE COOLANT, CHIP AUGER SYSTEM, RIGID TAPPING, QUICK CODE PROGRAMMING, FLOPPY DISK DRIVE 3.5", 4TH AXIS WIRED, PROGRAMMABLE COOLANT NOZZLE, COORDINATE ROTATION AND SCALLING, CUSTOM MACROS, 1000 BLOCKS PER SECOND, 1 MEGABYTE OF EXTENDED MEMORY.
CNC LATHES
HAAS CNC LATHE, MODEL HL-2
(1996) HAAS CNC CONTROL
SPECIFICATIONS:
10" X 20" (MAX) W/PROGRAMMABLE HYDRAULIC TAILSTOCK, 15 H.P. MOTOR, 50-3750 R.P.M. SPINDLE, STD. W/HYDRAULIC SYSTEM AND 8" CHUCK.
EQUIPPED WITH: 16C COLLET, TOOL HOLDERS.
HAAS CNC LATHE, MODEL HL-2
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
10" X 20" (MAX) W/PROGRAMMABLE HYDRAULIC TAILSTOCK, 15 H.P. MOTOR, 50-3750 R.P.M. SPINDLE, STD. W/HYDRAULIC SYSTEM AND 8" CHUCK.
EQUIPPED WITH: VERY LOW HOURS.
HAAS CNC LATHE, MODEL HL-2
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
10" X 20" (MAX) W/PROGRAMMABLE HYDRAULIC TAILSTOCK, 15 H.P. MOTOR, 50-3750 R.P.M. SPINDLE, STD. W/HYDRAULIC SYSTEM AND 8" CHUCK.
EQUIPPED WITH: LIVE TOOL OPTION, C-AXIS, AUTOBAR-400 BAR LOADER.
HAAS CNC LATHE, MODEL SL-20BB
(1999) HAAS CNC CONTROL
SPECIFICATIONS:
10" X 20" (MAX) 20-INCH SWING, 20-H.P. MOTOR, 50-4,0000 R.P.M. SPINDLE, A2-6 SPINDLE, 8" CHUCK.
EQUIPPED WITH: BIG BORE OPTION, TAILSTOCK, "VERY LOW HOURS".
HAAS CNC LATHE, MODEL SL-30
(2000) HAAS CNC CONTROL
SPECIFICATIONS:
14.5" X 34" (MAX) 30-INCH SWING, 30-H.P. MOTOR, 50-3,4000 R.P.M. SPINDLE, A2-6 SPINDLE, 10" CHUCK.
EQUIPPED WITH: LIKE NEW, "VERY LOW HOURS".
HAAS CNC LATHE, MODEL HL-4
(1998) HAAS CNC CONTROL
SPECIFICATIONS:
14.5" X 34" (MAX) W/PROGRAMMABLE HYDRAULIC TAILSTOCK, 30 H.P. MOTOR, 50-3400 R.P.M. SPINDLE, STD. W/HYDRAULIC SYSTEM AND 10" CHUCK.
EQUIPPED WITH: FACTORY RECONDITIONED #61944.
HAAS CNC LATHE, MODEL HL-6
(1997) HAAS CNC CONTROL
SPECIFICATIONS:
25" X 44" (MAX) W/PROGRAMMABLE HYDRAULIC TAILSTOCK, 30 H.P. MOTOR, 20-2400 R.P.M. SPINDLE, 2-SPEED GEARBOX AND 15" CHUCK.
EQUIPPED WITH: FACTORY RECONDITIONED #61378.
We appreciate your interest in our company, and hope you find our web site helpful and informative.
If you are currently in the market for machinery, or would like additional information please contact our sales department at:
(818) 865-0162, Fax (818) 865-0179
or click on the E-mail link: HAAS@universalmachinery.com